Product Center
Product Description
Product Performance /Product Performance
• Thoroughly removes carbon deposits from the combustion chamber, prevents piston ring seizure, restores piston ring elasticity, and enhances combustion chamber sealing; eliminates stubborn carbon buildup and varnish inside the cylinders, addressing knocking and starting difficulties caused by carbon deposits.
• Soaking removed spark plugs in this product can also quickly remove carbon deposits adhering to them.
• Rapidly enhances engine performance while reducing engine noise and wear, lowering fuel consumption and cutting emissions;
• A foam‑type detergent with strong adhesion, delivering outstanding performance in removing deposits; suitable for gasoline and diesel engines.
• Does not contain flammable ethanol-based substances; does not contain chlorofluorocarbons.
• Harmless to oxygen sensors and three-way catalytic converters.
Instructions for Use /Usage
• Preheat the engine and bring it to a warm operating temperature;
• Remove the spark plugs one by one; for diesel vehicles, remove the fuel injectors. Then, using the injection nozzle, inject this product into each cylinder through the spark plug hole until foam overflows from the opening, at which point stop.
• Soak for 10–15 minutes, use the equipment to extract any residual liquid, cover the cylinder port with a cloth, and dry the combustion chamber with an air gun.
• Use one can for each cylinder; repeat the above steps once more, start the engine and let it run for a few seconds, then use an air gun to dry the combustion chamber again.
• Install the spark plug (or fuel injector) and reassemble all components;
• Start the engine and let it idle for one minute, then rev it to 2,000–3,000 rpm to ensure that the softened carbon deposits are completely expelled until the exhaust smoke clears (approximately 2–3 minutes).