Product Center
西安Foam Cleaner for Oil-Prone Combustion Chambers
Category:
Phone: 400-888-8888
Product Description
Product Performance /Product Performance
• Oil-based formula, gentle on engine cylinders, compatible with lubricants.
• Thoroughly removes carbon deposits from the combustion chamber, prevents piston ring seizure, restores piston ring elasticity, and enhances combustion chamber sealing. It also eliminates stubborn carbon buildup and varnish inside the cylinders, addressing knocking and starting difficulties caused by carbon deposits.
• Soaking the removed spark plugs in this product can also quickly remove carbon deposits adhering to them.
• Rapidly enhances engine performance, reduces engine noise and wear, lowers fuel consumption, and cuts emissions.
• Foaming detergent with strong adhesion, delivering outstanding performance in removing deposits; suitable for gasoline and diesel engines.
• Harmless to oxygen sensors and three-way catalytic converters
Instructions for Use /Usage
• Preheat the engine and bring it to its normal operating temperature;
• Remove the spark plugs one by one; for diesel vehicles, remove the fuel injectors. Then, using the injection nozzle, inject this product into each cylinder through the spark plug hole.
• Soak for 15–30 minutes, then use the equipment to suction out any residual liquid.
• Repeat the above steps once more: start the engine and let it run for a few seconds, then use an air gun to dry the combustion chamber.
• Install the spark plug (or fuel injector) and reassemble all components.
• Start the engine and let it idle for one minute, then rev it to 2,000–3,000 rpm to thoroughly burn off the softened carbon deposits until the exhaust smoke clears (approximately 2–3 minutes).