Product Center


六安Turbocharger Cleaning Agent

Phone: 400-888-8888

Product Description

Product Performance /Product Performance

• Cleans carbon deposits, oil residues, and other build-ups from the turbocharger, throttle body, intake valves, and combustion chamber, restoring turbocharger performance and maintaining optimal operating conditions.
• A foam‑type detergent with strong adhesion, delivering outstanding performance in removing deposits; suitable for gasoline and diesel turbocharged engines.
• Improve fuel atomization and reduce emissions.
• Harmless to oxygen sensors and three-way catalytic converters.
 

Instructions for Use /Usage

• Start the engine and bring it to normal operating temperature, then disconnect the intake system hose located between the air filter and the turbocharger or intercooler.
• For gasoline engines, maintain the engine speed at 2,000 rpm; for diesel engines, keep it at idle.
• Inject this product into the intake manifold, and intermittently spray it over a short period to prevent spontaneous engine speed increases and engine knocking.
• After each injection of the product, wait for the engine speed to return to its original level. If necessary, for gasoline engines, increase the throttle to prevent stalling; for diesel engines, no additional throttle is required.
• Repeat the above steps until the entire bottle of product has been used;
• Run the engine at idle for approximately 5 minutes, then shut it off and reconnect the intake pipe.
• Start the engine and rev it 5–10 times (to a maximum of 3,000 rpm), or drive the vehicle for 5–10 km (keeping the engine speed below 3,000 rpm).
• Allow the engine to run for at least one minute, then shut it off.