Product Center


蒙自Combustion Chamber Reductive Protective Agent

Phone: 400-888-8888

Product Description

Product Performance /Product Performance

• Neutralizes residual liquids in the combustion chamber after cylinder cleaning, emulsifies water and contaminants, and enhances the sealing performance of the combustion chamber.
• Forms a protective film on the cylinder walls of the combustion chamber, providing lubrication and preventing carbon buildup, thereby restoring the internal combustion chamber volume.
• When used in conjunction with a combustion‑chamber foam cleaner, it enhances engine cold‑start performance, improves power output, stabilizes idle speed, and reduces engine noise and wear, while also lowering fuel consumption and emissions.
• Does not contain flammable ethanol-based substances; does not contain chlorofluorocarbons.
• Harmless to oxygen sensors and three-way catalytic converters.
 

Instructions for Use /Usage

• Use in conjunction with the combustion chamber foam cleaner;
• Inject this product into the combustion chamber of each cylinder through the spark plug hole using a nozzle, ensuring uniform distribution of the formulation on the cylinder walls.
• Soak for 5–10 minutes, then use the device to suction out any residual liquid.
• Use one bottle for a four-cylinder engine, then repeat the above steps once more.
• Install the spark plug (or fuel injector) and reassemble all components;
• Start the engine and let it idle for one minute, then rev it to 2,000–3,000 rpm to thoroughly flush out the softened carbon deposits until the exhaust smoke clears (approximately 2–3 minutes).