Product Center


吉安Dynamic Cleaning and Restoration Solution

Phone: 400-888-8888

Product Description

Product Performance /Product Performance

• Oil-based formula, gentle on engine cylinders, compatible with lubricants.
• Thoroughly removes carbon deposits from the combustion chamber, prevents piston ring seizure, restores piston ring elasticity, and enhances combustion chamber sealing.
• Removes stubborn carbon deposits and varnish from the cylinder, addressing knocking and starting difficulties caused by carbon buildup.
• Soaking removed spark plugs in this product can also quickly remove carbon deposits adhering to them.
• A foam‑type detergent with strong adhesion, delivering outstanding performance in removing deposits; suitable for gasoline and diesel engines.
• Harmless to oxygen sensors and three-way catalytic converters.
 

Instructions for Use /Usage

1. Use in conjunction with an in-cylinder carbon-deposit dynamic cleaning agent.
• Dynamic carbon‑removal cleaning of the internal components has been completed.
• Remove the spark plugs one by one; for diesel vehicles, remove the fuel injectors. Then, using the injection nozzle, inject this product into each cylinder through the spark plug hole.
• Soak for 5–10 minutes, use the equipment to extract any residual liquid, and thoroughly remove carbon deposits.
• Repeat the above steps once more: start the engine for a few seconds, then use an air gun to dry the combustion chamber.
• Install the spark plug (or fuel injector) and reassemble all components;
• Start the engine and let it idle for one minute, then rev it to 2,000–3,000 rpm to ensure that the softened carbon deposits are completely expelled until the exhaust smoke clears (approximately 2–3 minutes).
II. Use of this product alone
• Warm up the engine to its normal operating temperature, and extend the soaking time to 15–30 minutes, following the steps outlined above.